Guide: How To Re-Wax Your Barbour Jacket

Barbour wax jackets are perfect for modern life and when properly looked after, your wax jacket can last for many years. We recommend re-waxing your jacket annually to keep the rain away and ensure a smooth finish all-year long. And here’s how:

You Will Need:

Step 1 | Clean Your Jacket

Clean the jacket using cold water and a sponge to wipe down the outside of the jacket. Avoid using hot water, any kind of soap and NEVER put the jacket in the washing machine, as this will remove the wax coating permanently and the jacket cannot be rewaxed. 

barbour-wax-jacket

Step 2 | Soften The Wax

Take a tin of Barbour Wax Thornproof dressing. Remove the lid, stand the tin of dressing in a container of water hot enough to soften the wax. It should take approximately 20 minutes to melt the wax into a liquid consistency. 

barbour-wax-jacket

Step 3 | Wax Your Jacket

Using an old cloth or sponge, work the melted wax well into the jacket paying particular attention to seams, creases and dry patches. Wipe off any excess wax. You should keep the wax tin in the hot water while working in order to keep the wax softened. If the wax begins to harden top the container with more hot water. Ensure you keep the wax away from the corduroy collar, the inside of the jacket and inside of the pockets. 

barbour-wax-jacket

Step 4 | Dry Your Jacket

To ensure you get an extra smooth finish blow over with a hair dryer to even the spread of wax. 

barbour-wax-jacket

Step 5 | Re-wax Your Jacket Once a Year

Once you’ve re-waxed the jacket, hang it up. Allow to dry overnight in a warm place away from other garments. Be aware the jacket may lose excess wax for a short while so take care not to get your newly waxed jacket near leather or upholstery. 

Discover our range of iconic Barbour Wax Jackets today.

You May Also Like